Features:
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24 MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
System Includes:
SLX2 Handheld Wireless Transmitter
SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
- Automatic Transmitter Setup
- Backlit LCD with timeout feature
- Frequency and power lockout
- 3-segment battery fuel gauge
- 2 AA batteries (included) provide 8 hours of continuous use
- 518 - 782 MHz operating range
- Comes With Beta 58A Supercardioid Microphone
SLX4 Wireless Receiver
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
Beta 58A Microphone Cartirdge
This a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
Note: bodypack transmitter is not included with this system.
Overall System
Operating Range Under Typical Conditions: 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response (+/– 2 dB):
- 45 Hz minimum
- 15 kHz maximum
Total Harmonic Distortion: 0.5%, typical (ref. +/– 38 kHz deviation, 1 kHz tone)
Signal-to-Noise Ratio: >100 dB A-weighted
Operating Temperature Range: –18°C (0°F) to +50°C (+122°F)
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
SLX2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at minimum gain position
Dimensions (including SM58 cartridge): 254 mm x 51 mm dia. (10 x 2 in.)
Weight: 290 grams (10.2 oz.) without batteries
Housing: Molded PC/ABS handle and battery cup
Power: 2 “AA” size alkaline or rechargeable batteries
Battery Life: >8 hours (alkaline)
SLX4 Receiver
Dimensions: 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight: 816 g (1 lb. 13 oz.)
Housing: Galvanized steel
Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)
- XLR connector (into 600 ohm load): –13 dBV
- 1/4 inch connector (into 3000 ohm load): –2 dBV
Output Impedance:
- XLR connector: 200 ohms
- 1/4 inch connector: 1kohm
Sensitivity: –105 dBm for 12 dB SINAD, typical
Image Rejection: >70 dB, typical
Power: 12–18 Vdc at 150 mA, supplied by external power supply
